Fast and accurate continuous constant feeding control
Operating modes: 1. constant flow control; 2. Constant level control; 3. Quantitative feeding with constant flow
4 ~ 20mA or 0 ~ 10V regulator output
Control method: 1. Smart Zone;2.Optimized PID
Intelligent system learning and rapid self-tuning
Non-stop mending
Support for Remote/Local switching and Manual/Auto switching on panel
Rich information include instantaneous flow rate, setting value and cumulative total in one screen
Real-time status monitoring and alarm chain algorithm
Real-time monitoring cell’s load ratio. easy maintenance, and troubleshooting
Standard MODBUS RTU protocol for easy access to SCADA or DCS system
DIMENSIONS
SPECIFICATION
Enclosure | Panel Mount. Front plate: SS304, IP65. Case: Anodized Aluminum | ||
Run Mode | Constant feeding, Material level Balancing, Batch feeding | ||
Signal Range | -20mV~+20mV | Max. Sensitivity | 0.2uV/d |
FS Drift | 3ppm/°C | Linearity | 0.0005%FS |
Flowrate Unit | kg/h, t/h | Dec.point | 0, 1, 2, 3 |
Control Mode | Zone Adj. / PID Adj. | Max Quantity | <99,999,999t |
Display | 128x64 Yellow-Green OLED display | ||
Keypad | 16 Flat switch membrane with tactile-feel keys; polyester overlay | ||
Discrete I/O | 10 Inputs; 12 Outputs(24VDC @500mA with over-load protection) | ||
Analog Output | 4~20mA/0~10V | ||
USART | COM1: RS232;COM2: RS485 | ||
Serial Protocol | MODBUS-RTU | ||
Power Supply | 100~240VAC,50/60Hz,<100mA(@100VAC) | ||
Operating Temperature | -10°C ~ +40°C,Relative humidity:10%~90%,non-condensing |
Tuna T500-F Indicator : |