Save installation space with Panel Type Mounting structure
New generation built-in high-speed processor and strong on anti-interference
Optimized digital filter and fast tracking technology
4~20mA/0~10V analog output available
Over/under limit alarm
Embedded material transfer control
Embedded Setpoint comparison function
Weighing control at three different set settings at the same time
Automatic zero tracking available
Zero available power
Isolated RS232/RS485 serial interface
Standard MODBUS RTU protocol
DC24V power supply
SPECIFICATION
Enclosure | Front plate: Aluminum , IP65. Case: Aluminum | ||
Run Mode | 2-speed material transfer mode, Setpoint comparison,Over/under, Check weigh,Reduction weigh,Peak force measurement,Gross/net fill | ||
Signal Range | -20mV~+20mV | Increments | 1,2,5 x 10n (n=-3 ~1) |
Max. Sensitivity | 0.5uV/d | Max. Resolution | 1/50,000 |
FS Drift | 3ppm/°C | Linearity | 0.003%FS |
AD Refresh Rate | 100Hz | Cells Load | Four (4) 350 ohm load cells |
Display | 7-digit 0.4’ segment LED | ||
Keypad | 4 tactile-feel keys; polyester overlay | ||
Discrete I/O | 2xDI,3x Relay DO 2 Inputs; 3 Outputs(220VAC @ 5A) | ||
USART | COM1: RS232; COM2: RS485 | ||
Serial Protocol | MODBUS-RTU, Command output, Continuous Output | ||
Option | 4~20mA/0~10V, Profibus DP | ||
Power Supply | 18~30DCV, 60mA | ||
Operating Temperature | -10°C ~ +40°C,Relative humidity:10%~90%,non-condensing |